Wozart Universal IR

Troubleshooting

What should I do if the device isn't repsonding?

Follow the below steps sequentially till the problems is resolved.
 

  • Reconnect your controller device (phones, tablets, etc.) to the Wi-Fi network same as Wozart Universal IR.

  • Restart your Wi-Fi router.

  • Normal reset the Wozart Universal IR as explained below.

  • Factory reset the device as explained below; remove the device from the app before reconfiguring the accessory.
     

Note*: If the device is factory reset, all your customisations are lost. Do it only if all other options fail
 

Normal Reset

Switch off the power supply to the device for 5 seconds and then switch it back on.

Factory Reset

Insert a pin, Push and hold the button at the back for 10 seconds. The Red LED indicator on the device will start blink after the device is factory reset.

Note: If factory reset is done all your customization is lost. Do it only if required.

Need more help?

Talk to us

+91 83095 91336

Write to us