Wozart App

Add Automation

 

Automate your home with Wozart 

Set your home on auto-pilot mode; attend to more important activities while Wozart takes care of your mundane tasks. Automatically turn off or on your appliances and lights based on location, time and more.

Create an automation to control your home at a certain time

Create an automation that runs at a specific time, on certain days. Just open Wozart app on your device and follow these steps.

Wozart App - Scheduling _1
Wozart App - Scheduling _2
Wozart App - Scheduling _3
  • In the Automation tab, tap + on the upper-right corner.

  • Give a name to the Automation; tap ‘A Time of the Day’.

  • Choose a time and day(s); click ‘Next’.

  • Select the loads to automate and tap ‘Next’.

  • Adjust the status of the loads to your preference.

  • Tap ‘Done’.

Wozart App - Scheduling _4
 Wozart App - Scheduling _5
Wozart App - Scheduling _6
 

Create an automation based on your location

Automate your accessories to turn on or off when you arrive or leave your home. Just open Wozart app on your device and follow these steps.

Wozart App - Geo-Aware _ 1
Wozart App - Geo-Aware _ 2
Wozart App - Geo-Aware _ 3
  • Tap on Automation tab, then tap + on the upper-right corner.

  • Give a name to the Automation; Choose if you want the automation to occur when ‘People Arrive’ or ‘People Leave’ home.

  • Set radius for the Geo-Fence of your home and then tap ‘Add’.

  • Select the time for the automation; ‘During the Day’, ‘At night’ or between specific times and tap Next.

Wozart App - Geo-Aware _ 4
Wozart App - Geo-Aware _ 5
Wozart App - Geo-Aware _ 6
Wozart App - Geo-Aware _ 7
Wozart App - Geo-Aware _ 8
  • Select the loads you want to automate and tap ‘Next’.

  • Adjust the status of the loads to your preference.

  • Tap ‘Done’.

Create an automation based on triggers

 

Automate your accessories to turn on or off when temperature goes above a preset value, or motion is detected, etc. Just open Wozart app on your device and follow these steps.

01.png
02.png
03.png
  • Tap on Automation tab, then tap + on the upper-right corner.

  • Give a name to the Automation; tap "A Sensor detects something."

  • Select the accessory or sensor input that triggers the automation and choose the condition.

04.png
05.png

Enable/Disable an automation

  • Launch Wozart app and go to the Automation tab.

  • Tap on automation and it will be disabled if enabled and vice-versa

Edit/Delete an automation

  • Touch and hold on the automation.

  • Edit automation or tap ‘Delete’ at the bottom of the screen.

07.png
08.png
06.png
  • Select the accessories and adjust their states and tap Done.

Need more help?

Talk to us

+91 83095 91336

Write to us