Configure Wozart Aura device on an Android device
Turn your home into a connected smart home in minutes.
  • Install and power on the Wozart Aura Device.
  • Open the Wozart Aura app
  • Tap on the top right corner of the screen.
  • Tap ‘Add device’ from the drop down.
  • Click ‘Configure’. In case the device is already connected to your home Wi-Fi, tap ‘Skip’.
  • Tap ‘Connect’ and select ‘Aura Switch-XXXXXX’ from the listed Wi-Fi networks.
  • Return back once connected to the network
  • Tap ‘Configure Wi-Fi’.
  • Select the Wi-Fi network you would like the device to be added to. Enter the password and click ‘Connect’. (Please note, Aura devices will be connected to your 2.4GHz network only)
  • Sit tight will Aura device connects to your Wi-Fi and then tap ‘Done’.
  • Select aura device you want to configure and input the provided 8 digit USC (Unique Setup Code) of the device. (Please note, 8 digit USC (Unique Setup Code) can be found on the back of the Aura device or on the sticker provided in the package)
  • Configure Appliances by Name, Location / Room, Favorite, Icons (this helps in identifying your appliances in the app and to use voice assistant) and tap ‘Finish’.
  • Welcome to Connected Living! Enjoy controlling your home effortlessly from your smart devices or voice assistant.
Add Home
Give smart address to your physical home.
  • Open Wozart Aura app.
  • Tap in the upper-left corner.
  • Tap ‘Add Home’ from the drop down list.
  • Give your Home a name, set your home geo-location and then tap ‘Save’
  • Select a background for your home and tap ‘Save’.
  • To switch between Homes, tap and select a Home.
Edit/Delete a home
  • From the Home tab, tap on and select home and tap .
  • Customise your home or Tap ‘Delete’ at the bottom of the screen.
Add Room

Personalize your smart home by organizing loads by room and easily monitor and control connected loads.

  • In the home tab, tap on the top-right corner.
  • Tap ‘Add Room’ from the drop down list.
  • Give your room a name, select a background and tap ‘Save’.
  • To navigate between different rooms, go to Rooms tab and select a room.
Edit/Delete a room
  • Go to the Rooms tab, select room that you want to edit/delete.
  • On next page tap and select edit.
  • Customise your room or tap ‘Delete’ at the bottom of the screen.
Add Scene

Scenes let you control multiple appliances with a tap in the app.
For Example, a “Good Night” scene could be created to turn off all the lights, close the curtains, adjust the temperature on the AC to your preference all at once.

  • In the home tab, tap on the upper-right corner.
  • Tap ‘Add Scene’ from the drop-down list
  • Choose a Suggested Scene, or create a custom scene.
  • Give your scene a name, select an Icon, select the loads you want to add, and then tap ‘Next’.
  • Adjust the status of the loads to your preference.
  • Tap ‘Done’.
Edit/Delete scene
  • In the Home tab, touch and hold on the scene you want to edit/delete.
  • Edit the scene configuration or tap ‘Delete’ at the bottom of the screen.
Share Control of your home

Invite people to control, monitor your home, and allow them to control your home from anywhere; all with the Wozart aura app.

Invite Member

  • Before you begin, make sure you and the person you invite are signed into Wozart Aura app
  • Launch Wozart aura app, tapin the upper-left corner and if you have multiple homes set up, select the Home you wish to share with someone.
  • Go to Settings tab.
  • Click ‘Members’.
  • Tapon the top-right corner.
  • Enter the guest user email address registered with Wozart Aura.

    (Note: Guest user should be registered on the Wozart aura app to get the invite.)

  • Tap Send Invite.

Accept invite

  • Open Wozart Aura app and go to settings tab.
  • Tap Notification, and then tap Accept.
  • After you accept the invite, tapthen select the Home to control it.

Revoke Guest access

  • Open Wozart Aura app and go to settings tab.
  • Tap Notification, and then tap Accept.
  • After you accept the invite, tapthen select the Home to control it.

To leave a home

  • Tap from the home tab and select the Home you want to leave from.
  • Go to the Settings tab and tap Members.
  • Select your account and tap ‘Ok’ to leave.

(Please note, Revoking access or leaving a home and guest user you will no longer have access to the shared home.)

Automate your Home with Wozart Aura

Set your home on auto-pilot mode; attend to more important activities while Wozart Aura takes care of your mundane activities. Automatically turn off or on your lights or appliances based on your location and time.

Create an automation based on your location

Automate your accessories to turn on or off when you arrive or leave your home. Just open Wozart Aura app on your device and follow these steps.

  • Tap on Automation tab, then tap on the upper-right corner.
  • Give a name to the Automation; Choose if you want the automation to occur when ‘People Arrive’ or ‘People Leave’ home.
  • Set radius for the Geo-Fence of your home and then tap ‘Add’.
  • Select the time for the automation; ‘During the Day’, ‘At night’ or between specific times and tap Next.
  • Select the loads you want to automate and tap ‘Next’.
  • Adjust the status of the loads to your preference.
  • Tap ‘Done’.
Create Automation to control your home at a certain time

Create an automation that runs at a specific time, on certain days. Just open Wozart Aura app on your device and follow these steps.

  • In the Automation tab, tap on the upper-right corner.
  • Give a name to the Automation; tap ‘A Time of the Day’.
  • Choose a time and day(s); click ‘Next’.
  • Select the loads to automate and tap ‘Next’.
  • Adjust the status of the loads to your preference.
  • Tap ‘Done’.
Enable/Disable an autoamtion
  • Launch Wozart Aura app and go to the Automation tab.
  • Tap on automation and it will be disabled if enabled and vice-versa
Edit/Delete an automation
  • Touch and hold on the automation.
  • Edit automation or tap ‘Delete’ at the bottom of the screen.
Connect Google Assistant with Wozart Aura

Control connected devices with voice using Google Assistant. Just start by Saying “Ok Google” or “Hey Google” to turn an appliance on or off, set your scenes and dim your lights. For instance you can ask Google to set “Good Night” Scene and your home prepares itself for the night to your preference.

The Google Assistant requires either a Google Home Speaker, an Android 6.0+ mobile device or an Android Wear 2.0 + to connect with Wozart Aura.

  • Download and install the Google Home app.
  • At the top Left, tap > Set up device > Have something already set up?
  • Search and select ‘Wozart Aura’ from the list.
  • You will be redirected to a login page, login with the same email account registered with Wozart Aura.
  • On successful login, all your connected loads associated with Wozart aura account are listed.
  • You can choose names to call your connected loads and also assign them to rooms in a home for more convenient control.
  • Use simple voice commands and control all your connected appliances just by asking Google Assistant
Connect Amazon Alexa with Wozart Aura

Control connected devices with voice using Amazon Alexa. Alexa can be used to turn an appliance on or off, set your scenes and dim your lights. For instance you can ask Alexa to set “I’m Home” Scene and your home prepares itself for your arrival.

Control connected devices with Alexa, if you have an Amazon Echo, an Echo Dot, an Echo Show, an Echo Input, an Echo Studio, an Amazon Tap, or any device integrating with Alexa.

  • Download and install Amazon Alexa mobile app.
  • Tap on the top left and tap ‘Skills & Games’.
  • Search and select ‘Wozart Aura’ skill.
  • Tap ENABLE TO USE and you will be redirected to a login page.
  • Login with the same email account registered with Wozart Aura app.
  • Tap ‘DISCOVER DEVICES’ and wait for discovery to complete.
  • On successful discovery, connected devices will list under Devices and Scenes under Scenes in the Smart Home section of the Amazon Alexa app.
  • Tap on a load to assign a name and room according to your preference.
  • Repeat the above step for all the loads.
  • Once configured use simple voice commands and control all your connected appliances using alexa
Connect SmartThings with Wozart Aura

With SmartThings, you can control, monitor and automate a wide range of connected devices in your home. SmartThings can be used to turn an appliance on or off, set your scenes and dim your connected lights at the touch of a button, at the time of a day, or when you say “Turn on the porch lights.”

  • Download and install ‘SmartThings’ app on your mobile device.
  • Tap + icon and select ‘Add Device’.
  • Search and select Wozart.
  • Tap on Switch/Dimmer, you will be redirected to a login page.
  • Login with the email account registered with Wozart Aura.
  • Click X on the top left corner to finish login.
  • All the connected loads will be listed and then tap ‘Done’.
  • Now you can control all your connected appliances using SmartThings.
Troubleshooting
What should I do if the device isn't responding?

    Please follow the below steps sequentially till the problem is solved.
  • Reconnect your controller device to the Wi-Fi network to which the Aura Switch is connected.
  • Restart your Wi-Fi router.
  • Normal reset the device as explained below.
  • Factory reset the device as explained below, remove the unresponsvie accessory and reconfigure.


Toggle the switch connected to orange wire of switch connector (Load1) eight times continuously then you hear a buzzing sound or in case the switch panel is open, press the button with letters "NR" marked on the device or Switch off and back on, the MCB for the room which has the device to be reset.

Toggle the switch connected to red wire of switch connector (Load2) eight times continuously then you hear buzzing sound twice or in case the switch panel is open, press the button with letters marked "FR" on the device for five seconds.

If you need further assistance write to us at info@wozart.com or call us at +91 83095 91336.