Wozart Switch Controller Pro
Aura Switch Mini
How many appliances can Wozart Switch Controller Pro control?
Wozart Switch Controller Pro enables control of four appliances or electric circuits. The maximum rated current on each load is 5A.
The first two slots can be used to turn on or off, appliances and lights. Third slot (L3) is for fan and comes with 4-step noise-free fan speed regulation. Slot L4 is for lights and can be used for smooth dimming of LEDs.
Would my existing physical switches work after installing Wozart Switch Controller Pro?
Yes! Your existing physical switches funtion as before. When the applainces are controlled manually using physical switches, it reflects on the app as well.
Do I need additional smart hubs to control my appliances?
No, Wozart Switch Controllers are Wi-Fi enabled and communicate directly with your home Wi-Fi router and doesn't require additional hardware.
Will the device fit inside my existing switchboard panel?
Yes, Wozart Switch Controllers are meticulously designed to fit behind standard switchboards.
Does Wozart Switch Controller Pro require additonal or special wiring?
No. Wozart Switch Controllers doesn't require any kind of additional wiring and can be seamlessly integrated with your switchboard panel.
Do I need to change my switchboard?
No. Wozart Switch Controllers are designed to fit perfectly inside a standard switchboard panel.
What happens if I make changes to my Wi-Fi network or buy a new router?
In case the Wi-Fi network name or password is changed the device will not be able to connect back automatically. You have to get your Wozart device in to setup mode and configure it to the network.
To get Wozart Switch Controllers into setup mode, toggle the physical switch connected on second terminal (L2) eight times under five seconds.
Would the devices connect back in the event of power failure?
Once the Wi-Fi network is back online, Wozart devices will connect back automatically and be available for control from all your smart controller devices.
Can I integrate other smart devices with Wozart?
Wozart products are integrated with best of the smart home ecosystems so that you have a greater choice to customise & build your smart home.
Wozart devices can be integrated with devices that have "Works with Apple HomeKit" or "Works with SmartThings" or "Works with Google Assistant" or "Amazon alexa enabled" on the packaging.
Will Wozart Switch Controller Pro connect to a 5 GHz Wi-Fi network?
Wozart Switch Controllers will only connect and work with a Wi-Fi 2.4 GHz network. In case you have a dual-band Wi-Fi router ensure both the networks have different SSID(name) or turn off the 5 GHz band.
Why does my Wozart Switch Controller Pro occassionly get disconnected from the network and doesn't respond?
This can occur either due to network congestion or interface. If you are using a dual-band routers, ensure both the networks have different SSID(network name).
Please note: Traditional 2.4 GHz band gives a coverage upto 150 ft indoors and 300 ft outdoors.
To solve the issue:
2. Reconnect your smart devices to Wi-Fi network.
3. Access your router settings and check is there is any limit to the number of simultaneous connections.
What should I do if Wozart Switch Controller Pro is offline or not responding?
First, ensure the Wi-Fi network is working. In case there is no problem with the network, normal reset the device and check if it connected back. Even then, if the problem persists, factory reset the device and configure the device again. Get the Wi-Fi router closer to the device or add a repeater near to the device.